Skip to content
RecipeTailor

How to convert a recipe to a different pan size

A 9×13-inch pan has about 1.8 times the area of an 8-inch square. At the same batter depth, that means about 1.8 times every ingredient. Work out the factor from the two pans, use it for everything, and start checking for doneness early.

Work out each pan’s area

Measure across the top inside edges. A rectangle is length × width. A round pan is 3.14 × radius × radius, where the radius is half the diameter.

Areas of common pans, in square inches
PanArea
8-inch round50
9-inch round64
8×8 square64
10-inch round79
9×9 square81
9×13 rectangle117

Divide the new area by the old one

The factor is new area ÷ original area. Multiply every measured ingredient by it, keeping each amount with its unit.

Worked pan conversions
FromToFactor
8×8 square9×131.83×
9×9 square9×131.44×
8-inch round9-inch round1.27×
Two 9-inch rounds9×130.92×
9×138×8 square0.55×

Keep the depth about the same

Area works when both pans have similar sides, around 2 inches for most cake and brownie pans. A 9-inch springform 3 inches deep holds about 13 cups against 8.8 cups for a standard 9 × 2-inch round, so compare volume there instead.

For butter and oil cakes, King Arthur suggests filling the pan half to two-thirds full. Extra batter can go into a few muffin cups.

Adjust the bake time

A bigger pan spreads the batter thinner, so it bakes faster: start checking 10 to 15 minutes before the recipe’s time. A smaller, fuller pan takes longer and domes and browns more. Glass and ceramic brown less than metal. Go by the recipe’s doneness cues rather than the clock.

Chiffon, angel food and sponge cakes are hard to move between pans; keep them in the pan they were written for.

Deal with eggs and other whole items

A brownie recipe with 2 eggs moved from an 8×8 to a 9×13 needs 3.66 eggs. You can beat and weigh the eggs, or pick a nearby factor that uses whole ones: 1.5× (3 eggs) gives a slightly thinner pan, 2× (4 eggs) a slightly thicker one. Apply the factor you choose to every other ingredient too.

Sources and further reading

Scale for a new pan in RecipeTailor

Scale for pan in Settings gives the factor between two round or rectangular pans. Open Tailor recipe on your saved recipe and set the yield to the original times that factor, and every amount moves by the same exact factor. When an ingredient only comes whole, RecipeTailor offers the nearest smaller and larger batches that keep every proportion. Your original recipe stays as it was. Scaling your saved recipes is free.

Free recipe scaling · iPhone and Android

See how RecipeTailor works
RecipeTailor Scale quantities screen tripling a 4-serving spaghetti recipe to 12 servings, with each new amount shown above the original
Example records in RecipeTailor.

Questions

Can I swap an 8-inch square for a 9-inch round?

Yes. Both are about 64 square inches, so the recipe works without changes. Check doneness a little early, because corners bake faster than a round edge.

Should I change the oven temperature?

Usually not. Keep the recipe’s temperature and adjust the time, checking early in a larger pan and later in a smaller, deeper one.